The Woodburner :: Forums :: Pyrography Tips
<< Previous thread | Next thread >>   

Punch a Hole in Webbing - The Official Thread

Author Post
Wed May 24 2017, 09:50PM
Registered Member #16547
Joined: Wed May 24 2017, 09:36PM
Posts: 2
In my business, I regularly put a 3/8" hole in webbing. I first punch a small hole with a leather punch, and then I expand the hole and seal the edges with a flame, and then I push the hole down over a small, mounted 3/8" dowel to size the hole.

Is there a pyrography tip that will do this with one push?

Sorry about the double post. It was taking so long to post that I stopped it and refreshed the screen

[ Edited Wed May 24 2017, 09:58PM ]
Back to top
Moderators: Administrator, Ralph

Jump:     Back to top

Syndicate this thread: rss 0.92 Syndicate this thread: rss 2.0 Syndicate this thread: RDF
Powered by e107 Forum System

Render time: 0.0552 sec, 0.0139 of that for queries. DB queries: 29. Memory Usage: 2,924kB